Jason Jimenez/U.S. Marine Corps
Incorporating strength training into your week has remarkable benefits. So, the question is not whether you should incorporate it, but how to incorporate it safely into your physical activity plan. Here is a question from a retiree who is looking for advice on how to get started: Stew, what advice do you have for the retired veteran about to turn 60 who wants to get back into the gym for strength training? Thanks in advance. It has been a while since I lifted (25 yrs), and I mostly do cardio and stretching…….Continue reading….
By: Stew Smith
Source: Military.com
.
Critics:
Strength training follows the fundamental principle that involves repeatedly overloading a muscle group. This is typically done by contracting the muscles against heavy resistance and then returning to the starting position. This process is repeated for several repetitions until the muscles reach the point of failure. The basic method of resistance training uses the principle of progressive overload, in which the muscles are overloaded by working against as high resistance as they are capable of.
They respond by growing larger and stronger. Beginning strength-trainers are in the process of training the neurological aspects of strength, the ability of the brain to generate a rate of neuronal action potentials that will produce a muscular contraction that is close to the maximum of the muscle’s potential. Strength training also requires the use of proper or ‘good form’, performing the movements with the appropriate muscle group, and not transferring the weight to different body parts in order to move greater weight (called ‘cheating’).
An injury or an inability to reach training objectives might arise from poor form during a training set. If the desired muscle group is not challenged sufficiently, the threshold of overload is never reached and the muscle does not gain in strength. At a particularly advanced level, however, “cheating” can be used to break through strength plateaus and encourage neurological and muscular adaptation. Maintaining proper form is one of the many steps in order to perfectly perform a certain strength training technique.
Correct form in weight training improves strength, muscle tone, and maintaining a healthy weight. Improper form can lead to strains and fractures. Weight trainers often spend time warming up before starting their workout, a practice strongly recommended by the National Strength and Conditioning Association (NSCA). A warm-up may include cardiovascular activity such as light stationary biking (a “pulse raiser”).
Flexibility and joint mobility exercises, static and/or dynamic stretching, “passive warm up” such as applying heat pads or taking a hot shower, and workout-specific warm-up, such as rehearsal of the intended exercise with no weights or light weights. The intended purpose of warming up is to enhance exercise effectiveness and reduce the risk of injury. Evidence is limited regarding whether warming up reduces injuries during strength training. As of 2015, no articles existed on the effects of warm-up for upper body injury prevention.
For the lower limbs, several programs significantly reduce injuries in sports and military training, but no universal injury prevention program has emerged, and it is unclear if warm-ups designed for these areas will also be applicable to strength training. Static stretching can increase the risk of injury due to its analgesic effect and cellular damage caused by it. The effects of warming up on exercise effectiveness are clearer. For 1RM (One-repetition maximum) trials, an exercise rehearsal has significant benefits.
For submaximal strength training (3 sets of 80% of 1RM to failure), exercise rehearsal does not provide any benefits regarding fatigue or total repetitions for exercises such as bench press, squats, and arm curl, compared to no warm-up. Dynamic warm-ups (performed with greater than 20% of maximal effort) enhance strength and power in upper-body exercises. When properly warmed up the lifter will have more strength and stamina since the blood has begun to flow to the muscle groups.
Pulse raisers do not have any effect on either 1RM or submaximal training. Static stretching induces strength loss, and should therefore probably not be performed before strength training. Resistance training functions as an active form of flexibility training, with similar increases in range of motion when compared to performing a static stretching protocol. Static stretching, performed either before or after exercise, also does not reduce muscle soreness in healthy adults.
Like numerous forms of exercise, weight training has the potential to cause the breathing pattern to deepen. This helps to meet increased oxygen requirements. One approach to breathing during weight training consists of avoiding holding one’s breath and breathing shallowly. The benefits of this include protecting against a lack of oxygen, passing out, and increased blood pressure. The general procedure of this method is to inhale when lowering the weight (the eccentric portion) and exhale when lifting the weight (the concentric portion).
However, the reverse, inhaling when lifting and exhaling when lowering, may also be recommended. There is little difference between the two techniques in terms of their influence on heart rate and blood pressure. On the other hand, for people working with extremely heavy loads (such as powerlifters), breathing à la the Valsalva maneuver is often used. This involves deeply inhaling and then bracing down with the abdominal and lower back muscles as the air is held in during the entire rep.
Air is then expelled once the rep is done, or after a number of reps is done. The Valsalva maneuver leads to an increase in intrathoracic and intra-abdominal pressure. This enhances the structural integrity of the torso—protecting against excessive spinal flexion or extension and providing a secure base to lift heavy weights effectively and securely. However, as the Valsalva maneuver increases blood pressure, lowers heart rate, and restricts breathing, it can be a dangerous method for those with hypertension or for those who faint easily.
Training volume is commonly defined as sets × reps × load. That is, an individual moves a certain load for some number of repetitions, rests, and repeats this for some number of sets, and the volume is the product of these numbers. For non-weightlifting exercises, the load may be replaced with intensity, the amount of work required to achieve the activity. Training volume is one of the most critical variables in the effectiveness of strength training. There is a positive relationship between volume and hypertrophy.
The load or intensity is often normalized as the percentage of an individual’s one-repetition maximum (1RM). Due to muscle failure, the intensity limits the maximum number of repetitions that can be carried out in one set, and is correlated with the repetition ranges chosen. Depending on the goal, different loads and repetition amounts may be appropriate:
- Strength development (1RM performance): Gains may be achieved with a variety of loads. However, training efficiency is maximized by using heavy loads (80% to 100% of 1RM). The number of repetitions is secondary and may be 1 to 5 repetitions per set.
- Muscle growth (hypertrophy): Hypertrophy can be maximized by taking sets to failure or close to failure. Any load 30% of 1RM or greater may be used. The NCSA recommends “medium” loads of 8 to 12 repetitions per set with 60% to 80% of 1RM.
- Endurance: Endurance may be trained by performing many repetitions, such as 15 or more per set. The NCSA recommends “light” loads below 60% of 1RM, but some studies have found conflicting results suggesting that “moderate” 15-20RM loads may work better when performed to failure.
Training to muscle failure is not necessary for increasing muscle strength and muscle mass, but it also is not harmful. The speed or pace at which each repetition is performed is also an important factor in strength and muscle gain. The emerging format for expressing this is as a 4-number tempo code such as 3/1/4/2, meaning an eccentric phase lasting 3 seconds, a pause of 1 second, a concentric phase of 4 seconds, and another pause of 2 seconds.
The letter X in a tempo code represents a voluntary explosive action whereby the actual velocity and duration is not controlled and may be involuntarily extended as fatigue manifests, while the letter V implies volitional freedom “at your own pace”. A phase’s tempo may also be measured as the average movement velocity. Less precise but commonly used characterizations of tempo include the total time for the repetition or a qualitative characterization such as fast, moderate, or slow.
The ACSM recommends a moderate or slower tempo of movement for novice- and intermediate-trained individuals, but a combination of slow, moderate, and fast tempos for advanced training. Intentionally slowing down the movement tempo of each repetition can increase muscle activation for a given number of repetitions. However, the maximum number of repetitions and the maximum possible load for a given number of repetitions decreases as the tempo is slowed.
Some trainers calculate training volume using the time under tension (TUT), namely the time of each rep times the number of reps, rather than simply the number of reps. However, hypertrophy is similar for a fixed number of repetitions and each repetition’s duration varying from 0.5 s – 8 s. There is however a marked decrease in hypertrophy for “very slow” durations greater than 10 s. There are similar hypertrophic effects for 50-60% 1RM loads with a slower 3/0/3/0 tempo and 80-90% 1RM loads with a faster 1/1/1/0 tempo.
It may be beneficial for both hypertrophy and strength to use fast, short concentric phases and slower, longer eccentric phases. Research has not yet isolated the effects of concentric and eccentric durations, or tested a wide variety of exercises and populations. In general, more weekly training sessions lead to higher increases in physical strength. However, when training volume was equalized, training frequency had no influence on muscular strength.
In addition, greater frequency had no significant effect on single-joint exercises. There may be a fatigue recovery effect in which spreading the same amount of training over multiple days boosts strength gains, but this has to be confirmed by future studies. For muscle growth, a training frequency of two sessions per week had greater effects than once per week. Whether training a muscle group three times per week is superior to a twice-per-week protocol remains to be determined.
The rest period is defined as the time dedicated to recovery between sets and exercises. Exercise causes metabolic stress, such as the buildup of lactic acid and the depletion of adenosine triphosphate and phosphocreatine. Resting 3–5 minutes between sets allows for significantly greater repetitions in the next set versus resting 1–2 minutes.
For untrained individuals (no previous resistance training experience), the effect of resting on muscular strength development is small and other factors such as volitional fatigue and discomfort, cardiac stress, and the time available for training may be more important. Moderate rest intervals (60-160s) are better than short (20-40 s), but long rest intervals (3–4 minutes) have no significant difference from moderate.
For trained individuals, rest of 3–5 minutes is sufficient to maximize strength gain, compared to shorter intervals 20s-60s and longer intervals of 5 minutes. Intervals of greater than 5 minutes have not been studied. Starting at 2 minutes and progressively decreasing the rest interval over the course of a few weeks to 30s can produce similar strength gains to a constant 2 minutes. Regarding older individuals, a 1-minute rest is sufficient in females.
The largest increases in strength happen for the exercises in the beginning of a session. Supersets are defined as a pair of different exercise sets performed without rest, followed by a normal rest period. Common superset configurations are two exercises for the same muscle group, agonist-antagonist muscles, or alternating upper and lower body muscle groups. Exercises for the same muscle group (flat bench press followed by the incline bench press) result in a significantly lower training volume than a traditional exercise format with rests.
However, agonist–antagonist supersets result in a significantly higher training volume when compared to a traditional exercise format. Similarly, holding training volume constant but performing upper–lower body supersets and tri-sets reduce elapsed time but increased perceived exertion rate. These results suggest that specific exercise orders may allow more intense, more time-efficient workouts with results similar to longer workouts.
Exercise selection depends on the goals of the strength training program. If a specific sport or activity is targeted, the focus will be on specific muscle groups used in that sport. Various exercises may target improvements in strength, speed, agility, or endurance. For other populations such as older individuals, there is little information to guide exercise selection, but exercises can be selected on the basis of specific functional capabilities as well as the safety and efficiency of the exercises.
For strength and power training in able-bodied individuals, the NCSA recommends emphasizing integrated or compound movements (multi-joint exercises), such as with free weights, over exercises isolating a muscle (single-joint exercises), such as with machines. This is due to the fact that only the compound movements improve gross motor coordination and proprioceptive stabilizing mechanisms.
However, single-joint exercises can result in greater muscle growth in the targeted muscles, and are more suitable for injury prevention and rehabilitation. Low variation in exercise selection or targeted muscle groups, combined with a high volume of training, is likely to lead to overtraining and training maladaptation. Many exercises such as the squat have several variations. Some studies have analyzed the differing muscle activation patterns, which can aid in exercise selection.
Strengh Training For Hypermobility
.
StrengthTraining ,FitnessJourney ,WorkoutMotivation ,GymLife ,HealthyLiving ,BuildMuscle ,StrengthGoals ,FitnessInspiration ,TrainHard ,LiftHeavy ,GetStrong ,FunctionalFitness ,FitFam ,MuscleBuilding ,Exercise ,StrengthCoach ,FitForLife ,StrengthConditioning ,WorkoutTips ,Weightlifting
Leave a Reply